Assign an Alarm to a Cluster

When you assign an alarm to a cluster you specify the cluster that will run the alarm. To assign an alarm to a cluster, you use the Cluster Name property.

Note: If you system has more than one cluster, you need to specify a cluster for each alarm.

To assign an alarm to a cluster:

1. In the System Model activity, select Alarms.
2. On the menu below the Command Bar, select the required alarm type. The alarms list will display in the Grid Editor.
3. If you would like to update an existing alarm, locate the required record.
4. In the Cluster Name field displayed in the Property Grid, enter the name of the cluster that will run the alarm. You can select an existing cluster from the drop-down menu to the right of the field.
5. Click Save.

For more information on how to configure a particular alarm type, select one of the following topics:

• Add a Digital Alarm
• Add a Time Stamped Alarm
• Add an Analog Alarm
• Add an Advanced Alarm
• Add a Multi-Digital Alarm
• Add a Time Stamped Digital Alarm
• Add a Time Stamped Analog Alarm

See Also

Published June 2018