Visualization > Commands > Define Key Sequences for Commands | Visualization

Define Key Sequences for Commands

To define a command, you need to specify the key sequence that the operator types to issue the command. You can specify a single key for the key sequence, for example, the function key F2:

Key Sequence

F2

Alternatively, you can specify several keys that needs to be typed in sequence, for example, the function key F2 followed by the Enter key:

Key Sequence

F2 Enter

Note: If you use more than one key for the sequence, you need to separate each key with a space.

You will want to avoid the ambiguity in keyboard commands that can occur if you define separate commands that use a common key. For example, if you define a key sequence for one command as F3, and the key sequence for a second command as F3 F4, then when F3 is pressed, the first command would execute immediately; the second command could not execute. To avoid overlapping keyboard commands, add a delimiter to common keyboard commands, for example:

Key Sequence

F3 Enter

Command

SP1 = 50;

Key Sequence

F3 F4 Enter

Command

SP1 = 100;

These commands will not execute until the operator types the delimiter (the Enter key).

See Also

Published June 2018