Output Bar Genie

Genie Name: output_<n> / output_<n>_rb / output_<n>_rb_v / output_<n>_v
Genie Library: sa_misc
System Project: SA_Library

The Output Bar Genie allows you to add an output bar to a faceplate. Fourteen variations of the Genie are included in the SA_Library project:

• output_110
• output_110_rb
• output_50
• output_50_rb
• output_50_rb_v
• output_50_v
• output_65
• output_65_rb
• output_65_rb_v
• output_65_v
• output_80
• output_80_rb
• output_80_rb_v
• output_80_v

This Genie binds to the following equipment items:

• FB
• OP

Note: The 'output_50_rb_v' and 'output_65_rb_v' variations of this Genie can show the feedback position for a set of sub-equipment. They can be used in conjunction with the MEO Genie.

Genie Properties

Complete the following properties for the Genie in the Genie Properties dialog box.

• AN: This is an automatically-generated unique ID for the Genie object.
• Name: Optional. If you need to reference the Genie at runtime using Cicode, specify a unique name.

Genie Parameters

Select the Genie and double-click on it to view its parameters. The parameters are used as described in the table below:

Parameter	Description
Equipment	The name of the piece of equipment with which the Genie is associated.
Prefix	If the piece of equipment has a prefix specified for the FB or OP items (enabling support for multiple values), enter the prefix you want the Genie to access.
Equipment1 — Equipment5	Applies to the 'output_50_rb_v' and 'output_65_rb_v' variations of the Genie. To access a set of sub-equipment, enter up to five equipment names.

See also

Published June 2018