Local/Remote Indicator Genie

Genie Name:localremote_indicator_<n>
Genie Library: sa_faceplate
System Project: SA_Library

The Local/Remote Indicator Genie allows you to add a local/remote indicator to a faceplate. If the control mode for a piece of equipment is set to "Local" (mode 3), the indicator will highlight "L". For all other control modes, the indicator will highlight "R".

Two variations of the Genie are included in the SA_Library project:

• localremote_indicator_12
• localremote_indicator_16

The Genie binds to the following equipment item:

• CtrlMode

Genie Properties

Complete the following properties for the Genie in the Genie Properties dialog box.

• AN: This is an automatically-generated unique ID for the Genie object.
• Name: Optional. If you need to reference the Genie at runtime using Cicode, specify a unique name.

Genie Parameters

Select the Genie and double-click on it to view its parameters. The parameters are used as described in the table below:

Parameter	Description
Equipment	The name of the piece of equipment with which the Genie is associated.

See also

Published June 2018