MEO Genie

Genie Name: meo_<n> / meo_<n>_r
Genie Library: sa_common
System Project: SA_Library

The MEO Genie is used to create a Multiple Equipment Object (MEO). It is called by the MEO Selector Genie, which is the Genie you should use to add an MEO to a faceplate.

Four variations of the Genie are included in the SA_Library project:

• meo_16 — a small square MEO
• meo_17_r — a small round MEO
• meo_22 — a larger square MEO
• meo_25_r — a larger round MEO

The Genie binds to the following equipment item:

• RunStatus

For more information, see Configure Equipment Selection for Group Objects.

Genie Properties

Complete the following properties for the Genie in the Genie Properties dialog box.

• AN: This is an automatically-generated unique ID for the Genie object.
• Name: Optional. If you need to reference the Genie at runtime using Cicode, specify a unique name.

Genie Parameters

Select the Genie and double-click on it to view its parameters. The parameters are used as described in the table below:

Parameter	Description
Equipment	The name of the piece of equipment with which the Genie is associated.

See also

Published June 2018